milling相关论文
Position-varying surface roughness prediction method considering compensated acceleration in milling
Machined surface roughness will affect parts\' service performance.Thus,predicting it in the machining is important to......
In high speed milling aeronautical part,tool condition monitoring(TCM)is very impor-tant,because it is prone to get a ch......
Effects of Ni Content and Ball Milling Time on the Hydrogen Storage Thermodynamics and Kinetics Perf
The effects of Ni content and ball milling time on the hydrogen storage thermodynamics and kinetics performances of asmi......
...
Effect of ball milling on gas atomized Al88Ce8Fe4 alloy powders was investigated at charge ratios of 5∶1,15∶1 and 30∶......
Dry EDM was a new technology with some merits to satisfy the production recently.The technology of 3D cavity was carried......
A composite powder of Fe and ZSM-5 were produced by a mechanical milling method using ZSM-5 as grinding aids and spittin......
为了研制出高质量光学表面的离轴非球面碳化硅反射镜，提出一套包括铣磨成型、研磨、粗抛光、表面改性以及精密抛光等工序的完备的离......
This study identified the role of milling and parboiling on arsenic(As)content and its species in large numbers of rice ......
Scalable and facile synthesis of V_(2)O_(5) nanoparticles via ball milling for improved aerobic oxid
In recent years, transition-metal oxides(TMOs) have been long employed for aerobic oxidative desulfurization. However, t......
Al2O3 nanoparticles and MCrAlY/nano-Al2O3 nanocomposite powder(M=Ni,Co,or NiCo)were produced using high-energy ball mill......
Surface Modification of Rice Husk Ash by Ethanol-assisted Milling to Reinforce the Properties of Nat
Rice husk ash(RHA),obtained by pyrolysis of rice husks,can be used as a potential reinforcing filler for rubber composit......
The mixtures of α-quartz and graphite powder with different mass ratios were, respectively, high-energetically mechanic......
将经球磨处理的鳞片石墨作为前驱体采用氧化还原法制备石墨烯纳米片（GNs），考察晶体结构变化。将GNs作为催化材料应用于染料敏化太阳电......
<正> The single crystal of LiTaO3 is an important ferro-electric crystal, pcssessing comparatively better electro-optic,......
采用 X 射线衍射仪测定了 WC 粉的(100)和(300)衍射,并用 Fourier 变换对线形进行了分析.用扫描电镜对 WC 粉进行了形貌观察.结果......
An Li-Mg-N-H system has been synthesized from Mg(NH2)2 and LiH in the ratio 3:8 by a ball-milling process and its dehydr......
The results of X-ray diffraction (XRD) and high resolution electron microscopy (HREM) show that ball milling at room tem......
The influence of high energy ball milling on Al 30Si powder and ceramic particulate SiC was studied by means of SEM, X......
W-15% Cu (mass fraction) alloys were sintered with mechanically activated powder in order to develop new preparing proc......
Preparation and luminescence properties of a white emitting long afterglow luminous fiber based on F
A ternary luminous fiber with white light emitting was prepared. The fiber combined emission from Sr+2ZnSi_2O_7:Eu~(2+),......
Ce(SO4) 2-doped phosphosilicate gel was prepared by mechanical milling.Complex impedance analysis proved that the 15 h-b......
This paper presented a scientific study of the effects of four dispersion methods on the dispersion capability of nano L......
This paper demonstrated our discovery of the movement effect of BiFeO_3 nanoparticles in solution by strong electrical p......
NdFeCo magnetic powder was prepared by the process of smelting,high-energy ball milling and oxidation heat treating.The ......
Under the high-speed vibration milling conditions,the solvent and catalyst-free azo-Michael addition of chalcone derivat......
在氩气气氛下,将Ag2O与石墨通过机械活化或热还原反应生成Ag,对其等温还原过程的动力学进行研究。结果表明,采用Johnson-Mehl-Avra......
Organic sulfur in high sulfur petroleum coke was treated as the S source for synthesis of ZnS photocatalyst. Experimenta......
Effect of titanium based complex catalyst and carbon nanotubes on hydrogen storage performance of ma
Mg (MgH2 )-based composites, using carbon nanotubes (CNTs) and pre-synthesized titanium based complex (TCat) as the cata......
NaAlH4 complex hydrides doped with lanthanon hydrides were prepared by hydrogenation of the ball-milled NaH/Al+ xmol.% R......
Anisotropic Sm_2Co_(17) nano-flakes produced by surfactant and magnetic field assisted high energy b
Anisotropic Sm2Co17 flakes with high aspect ratio were prepared by magnetic field assisted high energy ball milling in t......
The nanocrystalline magnets with nominal compositions of Sm1-xLuxCo6.8Zr0.2(x=0,0.2,0.4,0.6)were prepared directly by th......
Effect of structural parameters of Gaussian repaired pit on light intensity distribution inside KH_2
KH2PO4(KDP) crystal with excellent optical properties is a very important element of inertial confinement fusion(ICF) de......
Ball-milling MoS_2/carbon black hybrid material for catalyzing hydrogen evolution reaction in acidic
Replacing platinum for catalyzing hydrogen evolution reaction(HER) in acidic medium remains great challenges. Herein, we......
This work studied the preparation of starting powder mixture influenced by milling time and its effect on the particle m......
The synthesis of micro-sized silicon carbide whiskers and the application for heat transfer enhancem
This paper presents a simple and cost-effective method for the production of micro-sized silicon carbide whiskers at hig......
Electrochemical performance of Klason lignin as a low-cost cathode-active material for primary lithi
A few classes of organic compounds are promising electrode-active materials due to their high power and energy densities......
The structure and hydriding/dehydriding behaviors of La2Mg17-10 wt.%Ni composite prepared by mechanical milling were inv......
The grinding of ultra-fine talcum powder and its application in a polypropylene (PP) matrix were investigated. Ultra-fin......
Crystal structure and magnetic properties of SmCo_(6.6)Nb_(0.4) nanoflakes prepared by surfactant-as
SmCo6.6Nb0.4nanoflakes with TbCu7structure were successfully prepared by surfactant-assisted high energy ball milling(SA......
Strong enhancement on dye photocatalytic degradation by ball-milled TiO_2: A study of cationic and a
TiO_2 particles with desirable properties were produced by undergoing specific durations of ball milling.Characterizatio......
The hydrogen storage properties and catalytic mechanism of FeCl_2-doped LiAlH_4 were investigated in minute details. LiA......
To explore the effects of mechanical activation methods(ball mill, planetary mill and rod mill) on the oxidation and the......
本文阐述了化学辅助离子束刻蚀(Chemiclly-assisted ion beam milling)、淀积(后统称离子束修补)技术的基本原理以及实现的过程,同......
通过共沉淀和磁选从绿矾中回收磁铁矿。在共沉淀阶段,研究反应条件对铁回收的影响,确定最佳反应参数如下:n(CaO)/n(Fe~(2+))1.4:1......
The naniondentation fracture of multilayer hard coatings, such as TiN, TiN/Ti(C, N)/TiC, TiN/Ti (C,N)/TiC/Ti (C, N)/TiC ......
MATHEMATICAL MODEL OF MILLING TEMPERATURE AND TEMPERATURE FIELD ANALYSIS FOR THREE-DIMEN-SIONAL COMP
The mathematical mode1 on the temperature of the waved-edge is constructed accordingto Jaeger’s theory of moving solid......
